Military Fuel Bladders

Manufactured using the most advanced Mil-spec fabrics, fittings, and techniques on the market today.

Military Fuel and Water Bladders

Built to a variety of military specifications, or your specifications, Ready Military Bladders are made using the most advanced fabrics, fittings, and manufacturing techniques on the market today. We produce both water and fuel bladders.

The Ready Fuel Bladder is built for storing ASTM Fuel A, Crude oil, Diesel oil, Jet-A, JP-8, JP-5, or gasoline. Our Bladders are built to meet or exceed the following military specifications: ATPD 2262, ATPD 2264, ATPD 2265, ATPD 2266, and PD53048. Our Berry Amendment Compliant fuel bladders and spill berms are available for our Department of Defense customers.

Additionally, our quality manufacturing techniques exceed current military specifications ranging from 3000 – 210,000-gallons. In addition to conventional military bladder tanks, we are always ready to help design custom solutions to support our troops. Call us at 941-739-9487 to discuss your containment needs.

We pressure tests each bladder tank before shipping, to meet the Mil-Spec and our quality standards
Capacity U.S. Gallons Dimensions Unfolded Dimensions Crated Tank Weight Empty Weight Crated
3,000
14 ft x 14 ft
85 in. x 60 in. x 31.5 in.
346 lbs
634 lbs
10,000
22 ft x 22 ft
85 in. x 60 in. x 31.5 in.
533 lbs
857 lbs
20,000
24 ft x 28 ft
85 in. x 60 in. x 31.5 in.
656 lbs
910 lbs
50,000
24 ft x 67 ft
96 in. x 60 in. x 31.75 in.
1,255 lbs
1,806 lbs
210,000
70 ft x 70 ft
114.25 in. x 80 in. x 43.75 in.
5,000 lbs
5,700 lbs

Military Bladder tanks include anodized aluminum fittings that are permanently bonded to the skin, as follows:

Bonded Fittings 3,000 10,000 20,000 50,000 210,000
Filler/discharge assembly 4 in
2
2
2
2
Filler/discharge assembly 6 in
2
Vent Fitting Assembly, 2 in
1
1
1
1
1
Drain Fitting Assembly, 2 in
2
2
2
2
4

* Quantity per Tank
In addition to the above bladder tank configuration, we can add fittings or increase the fitting sizes to meet your needs.

Packed with the bladder tanks are the following quick disconnect fittings & accessories:

Quick Disconnect Fittings & Accessories 3,000 10,000 20,000 50,000 210,000
Drain Hose, M X F, 2 in. x 8 ft
2
2
2
2
4
Drain Valve Assembly, M X F, 2 in.
2
2
2
2
4
Filler/Discharge Hose Assembly, M X F, 4 in. x 10 ft
1
1
1
1
Filler/Discharge Valve Assembly, M X F, 4 in
1
1
1
1
Filler/Discharge Hose Assembly, M X F, 6 in. x 10 ft
2
Filler/Discharge Valve Assembly, M X F, 6 in.
2
Repair Kit, ATPD-2263, Type I
1
1
Repair Kit, ATPD-2263, Type II
1
1
1
Set of Replacement 0-Rings, gaskets & fasteners
1
90 Degree Elbow, M X F, 4 in.
1
1
1
1
90 Degree Elbow, F X F, 4 in
1
1
1
1
90 Degree Elbow, M X F, 6 in
1
90 Degree Elbow, M X M, 6 in
1
Flame Arrestor with Pressure Relief Cap, 2 in (fuel tanks)
1
1
1
1
1
Pressure Relief Cap (Mushroom type), 2 in (water tanks)
1
1
1
1
1

Berm Liners and ground cloths for secondary containment are available for deployment with fuel tanks and water tanks respectively.

Sizes are as follows:

Description For use with Tank Capacity Ground Cloth Dimensions Berm Liner Dimensions
Size I
3,000 Gallons
16 ft x 16 ft
37 ft x 37 ft
Size II
10,000 Gallons
25 ft x 25 ft
52.5 ft x 52.5 ft
Size III
20,000 Gallons
30 ft x 30 ft
59 ft x 59 ft
Size IV
50,000 Gallons
26 ft x 68 ft
59 ft x 100 ft
Size V
210,000 Gallons
70 ft x 70 ft
108 ft x 108 ft